Home Linux Commandline Tips How to Mount and Unmount Filesystems in Linux

How to Mount and Unmount Filesystems in Linux

The Linux operating system is basically a file system and without these files’ formats and structures, the definition of this operating system environment would be incomplete.

In other words, files are the central units of the Linux operating system architecture. The Linux filesystem stores OS-associated files and directories. Filesystems are also evident in USB and hard disk drives and a properly configured network can also permit the sharing of these filesystems among different machines.

This article seeks to expose us to the mount and umount commands primarily used in attaching and detaching file systems from various mount points.

Listing Mounted Filesystems in Linux

Linux makes it possible for a filesystem to be mounted on any directory location. A successfully mounted filesystem makes it possible for its associated/stored files and directories to be accessible from that mount directory. The directories are also referred to as the filesystem mount points.

By default, your Linux operating system already has some filesystems mounted. To get a preview of these mounted filesystems, execute the Linux mount command without any flags or arguments.

$ mount
Check Linux Mounted File System
Check Linux Mounted File System

Consider the following last entry from the execution of the above mount command.

/dev/sdb5 on /media/dnyce/117137A85FFD287C type fuseblk (rw,nosuid,nodev,relatime,user_id=0)
  • /dev/sdb5 is the mounted filesystem/device name.
  • /media/dnyce/117137A85FFD287C is the mount point.
  • fuseblk is the filesystem type.
  • (rw,nosuid,nodev,relatime,user_id=0) is the mount options.

To review the mounting information associated with a specific filesystem type like fuseblk, vfat, ext4, fuseblk, etc., we can implement a mount command (with a -t flag) similar to the following:

$ mount -t fuseblk
Check Mounted File System Type
Check Mounted File System Type

Mounting Filesystems in Linux

To successfully mount a filesystem, we have to adhere to the following two rules:

  • Make sure a mount point exists or create one using the Linux mkdir command.
  • Reference the following command syntax to successfully mount the filesystem.
$ sudo mount -t Type Device MountPoint

A Linux operating system can automatically detect the type of filesystem associated with a device hence the use of the -t option is not explicitly needed.

However, in cases where a partition is not formatted or is corrupted and/or mandatory filesystem tools like the ntfs-3g package (needed for read and write access for NTFS partitions) are not installed, the inclusion of the -t option is necessary to successfully mount that filesystem.

For security reasons, Linux only allows sudoer/root users to perform mounting operations. Other users will be able to have directory access after the mounting point directories are set with the needed permissions (by root/sudoer users).

Mounting USB Drive/Stick in Linux

First, identify the USB block device with the Linux fdisk command.

$ sudo fdisk -l 
Check USB Device in Linux
Check USB Device in Linux

Create a mount point if you do not have one yet.

$ sudo mkdir /mnt/usb32G

Mount the Usb drive:

$ sudo mount /dev/sdb1 /mnt/usb32G

The USB drive should now be accessible from the /mnt/usb32G directory.

$ sudo mount | grep usb32G
Mount USB Drive in Linux
Mount USB Drive in Linux

Mounting ISO Files in Linux

A pseudo-device known as a loop device is effective in mounting an ISO image since it is not restricted to a physical device. This loop device makes the ISO image files accessible.

Create a mount point directory:

$ sudo mkdir /mnt/CorePlusIso

Mount the ISO image and make sure to check the absolute path to the ISO file.

$ sudo mount $HOME/Downloads/CorePlus-current.iso /mnt/CorePlusIso -o loop
Mount ISO File in Linux
Mount ISO File in Linux

You will notice that ISO images have read-only permission access. To make modifications, you will need to duplicate the ISO files from the mount directory to another directory location before making your needed changes.

$ ls -l /mnt/CorePlusIso 
$ sudo mount | grep CorePlusIso
Check ISO Files in Linux
Check ISO Files in Linux
Useful Mount -o Options

The -loop is for mounting loop devices.

$ sudo mount -t Type Device MountPoint -o loop

The -rw enables read-write on the mounted filesystem.

$ sudo mount -t Type Device MountPoint -o rw

The -ro enables read-only on the mounted filesystem.

$ sudo mount -t Type Device MountPoint -o ro

The -noauto disables automatic mounting of the filesystem during system reboot.

$ sudo mount -t Type Device MountPoint -o noauto

Mount File System Automatically in Linux

Use the /etc/fstab file when you want your filesystem to automatically mount after a successful system reboot.

$ cat /etc/fstab
Linux Fstab File
Linux Fstab File

For instance, to make the CorePlus-current.iso file mount automatically after mounting it in the /mnt/CorePlusIso directory, first run the command:

$ sudo mount | grep CorePlusIso 
List ISO Mount in Linux
List ISO Mount in Linux

The above command execution produces an output like:

/home/dnyce/Downloads/CorePlus-current.iso on /mnt/CorePlusIso type iso9660 (ro,relatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8)

Edit the above output to be something like:

<file system>                           <mount point>    <type>    <options>
/home/dnyce/Downloads/CorePlus-current.iso    /mnt/CorePlusIso         iso9660       ro,relatime,utf8 

The above line can then be added as an entry in the /etc/fstab file.

Once the Linux system reboots, mounting the above file will be as easy as pointing to its file system directory.

$ sudo mount /home/dnyce/Downloads

Unmounting a Filesystem in Linux

If it is a USB device labeled /dev/sdb1, we can unmount it with the command:

$ sudo umount /dev/sdb1

For an iso image, unmount it from its mount point directory:

$ sudo umount /mnt/CorePlusIso

To unmount multiple filesystems adhere to the command:

$ sudo umount /dev/sdb1 /mnt/CorePlusIso

When wanting to unmount a filesystem and still unsure whether it is operational, use the -l flag which will make sure the pending read and write operation completes before successfully unmounting the filesystem.

$ sudo umount -l [MOUNT-POINT]

If you want to force a filesystem to unmount, implement the command:

$ sudo umount -f [MOUNT-POINT]

We have successfully covered how to mount various filesystems in Linux both temporarily and permanently. We have also demonstrated to effectively unmount the same filesystems. Hope this article guide was useful. Feel free to leave a comment or feedback.

Ravi Saive
I am an Experienced GNU/Linux expert and a full-stack software developer with over a decade in the field of Linux and Open Source technologies. Founder of TecMint.com, LinuxShellTips.com, and Fossmint.com. Over 150+ million people visited my websites.

Each tutorial at UbuntuMint is created by a team of experienced writers so that it meets our high-quality standards.

Was this article helpful? Please add a comment to show your appreciation and support.

Got something to say? Join the discussion.

Thanks for choosing to leave a comment. Please keep in mind that all comments are moderated according to our comment policy, and your email address will NOT be published or shared. Please Do NOT use keywords in the name field. Let's have a personal and meaningful conversation.